The Android or iOS app is optional but will get you up and running in just a few minutes. Please download using the links below
Open up the app, create an account, and log in.
During manufacturing, WiFi credentials may have been stored in your device. You need to clear them out before you can connect.
Locate the WiFi rest button near the power plug. There are 2 buttons, so be sure to press the correct one.
The WiFi button is opposite of the USB plug.
Press and hold the button for 15 seconds until the LED light begins flashing quickly
The credentials are now cleared and we can connect to it.
WARNING: Only 2.4Ghz networks will work. Your phone must be connected to a 2.4Ghz network for this to work
To select a device, find it on the main page and touch it to open.
Select the settings tab
Set up the following values to run a test.
Press OPEN and then CLOSE to test